Dear Sir/Madam,
Please find remittance advice attached.
Yours faithfully,
Accounts Department
The message herewith may contain information that is confidential.
If you are not the intended recipient, please advise the sender immediately by reply e-mail and delete this message, with any attachments.
_________________________________________________________________
Although this e-mail and its attachments are believed to be free from any virus,
it is the responsibility of the recipient to ensure that they are virus free.
From: Jon Mathias <jon.mathias@vale-consultancy.co.uk>
Sent: 08 July 2020 15:02
To: Nicola Roach <Nicola.Roach@vale-consultancy.co.uk>
Cc: Rachel Morgan <rachel.morgan@vale-consultancy.co.uk>
Subject: FW: Plantroom works, scrubber and boiler install
Nicola,
Can you pay the planning fee for Mite please, with our cards
The application number is 20/0593/10
Details to pay are on the email attached, we will then get an order raised from Mitie to cover it!
Kind regards,
Jon Mathias
( 01656 863794
* jon.mathias@vale-consultancy.co.uk
P Please consider the environment - only print this email if absolutely necessary
From: Jon Mathias
Sent: 08 July 2020 14:43
To: Yearsley, Dale <Dale.Yearsley@ge.com>; Jenny Williams <Jenny.Williams@mitie.com>
Subject: FW: Plantroom works, scrubber and boiler install
Dale/Jenny,
Application number for the planning fees payment, following my email last week!
Kind regards,
Jon Mathias
( 01656 863794
* jon.mathias@vale-consultancy.co.uk
P Please consider the environment - only print this email if absolutely necessary
From: Howard, Giles <Giles.Howard@rctcbc.gov.uk>
Sent: 08 July 2020 13:15
To: Jon Mathias <jon.mathias@vale-consultancy.co.uk>
Subject: RE: Plantroom works, scrubber and boiler install
Hi Jon,
Sorry for the delay, I’ve just had a look to see where this has got to. The application number is 20/0593/10 if you want to quote that number for the payment.
Many thanks, Giles
From: Jon Mathias <jon.mathias@vale-consultancy.co.uk>
Sent: 30 June 2020 12:44
To: Howard, Giles <Giles.Howard@rctcbc.gov.uk>
Subject: RE: Plantroom works, scrubber and boiler install
Thanks Giles,
Will there be a reference number for the payment, obviously usually get that when I submit online, but not done yet/ do I need to that as well?
Kind regards,
Jon Mathias
( 01656 863794
* jon.mathias@vale-consultancy.co.uk
P Please consider the environment - only print this email if absolutely necessary
From: Howard, Giles <Giles.Howard@rctcbc.gov.uk>
Sent: 30 June 2020 12:01
To: Jon Mathias <jon.mathias@vale-consultancy.co.uk>
Subject: RE: Plantroom works, scrubber and boiler install
Hi Jon,
Thanks for the email, I’ll pass this on for the file to be made up.
The fee can be paid online, as per the attached. Alternative planning services should be able to take a card payment by phone on 01443 281134/281135.
Any questions please drop me a line.
Kind regards, Giles
From: Jon Mathias <jon.mathias@vale-consultancy.co.uk>
Sent: 30 June 2020 11:52
To: Howard, Giles <Giles.Howard@rctcbc.gov.uk>
Cc: Yearsley, Dale <Dale.Yearsley@ge.com>; Grose, Jamie (GE Aviation) <Jamie.Grose@ge.com>
Subject: RE: Plantroom works, scrubber and boiler install
Hi Giles,
Please see attached our application as requested below following your initial review of the project.
Attached is the following:
Planning application form
CIL Form
Design statement
Location plan
Block plan
Existing elevations/section
Proposed elevations/section
Specialist suppliers drawings, process materials & data sheet for emissions.
Existing stack/ roof Photographs
We have set the fee under plant and machinery as requested based on the new cleaning bay area of 480m2.
If you have any further queries or additional information, please do not hesitate to contact us.
Kind regards,
Jon Mathias
( 01656 863794
* jon.mathias@vale-consultancy.co.uk
P Please consider the environment - only print this email if absolutely necessary
From: Howard, Giles <Giles.Howard@rctcbc.gov.uk>
Sent: 30 June 2020 08:03
To: Jon Mathias <jon.mathias@vale-consultancy.co.uk>
Subject: RE: Plantroom works, scrubber and boiler install
Good morning Jon, I don’t see why that wouldn’t be acceptable! Many thanks, Giles
From: Jon Mathias <jon.mathias@vale-consultancy.co.uk>
Sent: 29 June 2020 22:23
To: Howard, Giles <Giles.Howard@rctcbc.gov.uk>
Cc: Yearsley, Dale <Dale.Yearsley@ge.com>
Subject: RE: Plantroom works, scrubber and boiler install
Hi Giles,
Thanks for the information below, can I just clarify the location plan and the red line request and blue line border?
I have put the redline around the unit/building in question and blue line around site boundary?
Could you confirm please?
Kind regards,
Jon Mathias
( 01656 863794
* jon.mathias@vale-consultancy.co.uk
P Please consider the environment - only print this email if absolutely necessary
From: Howard, Giles <Giles.Howard@rctcbc.gov.uk>
Sent: 22 May 2020 15:17
To: Jon Mathias <jon.mathias@vale-consultancy.co.uk>
Subject: RE: Plantroom works, scrubber and boiler install
Hi Jon,
Thanks for the email. I’m fine thanks and hope you are too, but working from home has taken some getting used to.
I’ve had a look at the attachments and wondered whether the replacement stack would come within the scope of Part 8 Class A of the GPDO. I’ve checked the regs and whilst it might be able to satisfy the criteria of A.1 (a-g) I think it would fall foul of the highlighted condition below:
Conditions
A.2 Development is permitted by Class A subject to the following conditions—
(a) the development must be within the curtilage of an existing industrial building or warehouse;
(b) any building as erected, extended, or altered may only be used—
(i) in the case of an industrial building, for the carrying out of an industrial process for the purposes of the undertaking, for research and development of products or processes, or the provision of employee facilities ancillary to the undertaking;
(ii) in the case of a warehouse, for storage or distribution for the purposes of the undertaking or the provision of employee facilities ancillary to the undertaking;
(c) no building as erected, extended or altered may be used to provide employee facilities—
(i) between 7.00 pm and 6.30 am, for employees other than those present at the premises of the undertaking for the purpose of their employment, or
(ii) at all, if a notifiable quantity of a hazardous substance is present at the premises of the undertaking;
(d) any new building erected must, in the case of article 1(5) land or land within a World Heritage Site, be constructed using materials which have a similar external appearance to those used for the existing industrial building or warehouse; and
(e) any extension or alteration must, in the case of article 1(5) land or land within a World Heritage Site, be constructed using materials which have a similar external appearance to those used for the building being extended or altered.
Therefore I think a straightforward planning application would be required with:
· App form
· CIL form
· Site Location plan (draw the red line area tight, rest of the site lined in blue)
· Block Plan
· Elevations of old and new stack
· Brief statement so consultees will know what the stack will emit
· Any other supporting info, e.g. like the photographs you have supplied
As you know, In terms of the fee, this would be under ‘plant and machinery’.
I hope this helps, but don’t hesitate to come back to me.
All the best, Giles
From: Jon Mathias <jon.mathias@vale-consultancy.co.uk>
Sent: 21 May 2020 21:51
To: Howard, Giles <Giles.Howard@rctcbc.gov.uk>
Subject: FW: Plantroom works, scrubber and boiler install
Hi Giles
Hope you are all well.
GE has asked me to laise with you regarding any requirements for planning, regarding a new stack replacing the old one due to a relocation of the boiler.
The old stack is the forefront of my photo and noted on the plan below. The new location is also shown below about 20m along the roof.
The stack is 8.5m high, similar height of the existing, but due to it being further in board the building unlikely to be seen by any residents/highway.
If you have any queries please call my mobile 07810128032
Kind regards,
Jon Mathias
( 01656 863794
* jon.mathias@vale-consultancy.co.uk
P Please consider the environment - only print this email if absolutely necessary
From: Yearsley, Dale <Dale.Yearsley@ge.com>
Sent: 21 May 2020 13:26
To: Jon Mathias <jon.mathias@vale-consultancy.co.uk>
Subject: FW: Plantroom works, scrubber and boiler install
From: Vic Delveir <v.delveir@sfeuk.com>
Sent: 15 May 2020 10:00
To: Yearsley, Dale <Dale.Yearsley@ge.com>; Grose, Jamie (GE Aviation) <Jamie.Grose@ge.com>
Cc: Watt, John (GE Aviation) <john.watt@ge.com>; Neil Vaughan <N.Vaughan@sfeuk.com>; Terry Dalvair <t.dalvair@sfeuk.com>
Subject: EXT: FW: Plantroom works, scrubber and boiler install
Dear Dale
Please see the revised layout of the scrubber which we feel is the best place, putting new boiler system in this position allows us to move the scrubber/stack into the room an additional 2.5m, hopefully this enables us to keep orientation as we would like, also it keeps the new and temp pipework to a minimum.
As discussed we want to keep the fan/stack closest to the outside wall. For maintenance, should it need to be replaced etc..
Once we have position fixed we can then look at the support frame dims for you Dale.
Please can you review the attached and confirm acceptance.
Regards
Vic Delveir
Business Development Director
Surface Finishing Engineering Ltd
Unit 16 Webner Industrial Estate
Ettingshall Road
Wolverhampton
WV2 2LD
Tel: 01902 409186
Mob: 07908 377786
ü Consider your responsibility to the environment - think before you print!
Disclaimer
---------------------------------------------------------------------------
This email (which includes any attached files) is confidential
and may also be legally privileged. It is intended solely for the use of the
individual to whom it is addressed. Any views or opinions presented
are solely those of the author and do not necessarily represent those
of Surface Finishing Engineering Ltd.
From: Yearsley, Dale <Dale.Yearsley@ge.com>
Sent: Thursday, 14 May, 2020 12:48 PM
To: Neil Vaughan <N.Vaughan@sfeuk.com>; Vic Delveir <v.delveir@sfeuk.com>; Terry Dalvair <t.dalvair@sfeuk.com>
Cc: Grose, Jamie (GE Aviation) <Jamie.Grose@ge.com>; Watt, John (GE Aviation) <john.watt@ge.com>; John, Mark (GE Aviation) <mark.john1@ge.com>
Subject: RE: Plantroom works, scrubber and boiler install
HI Vic ,Neil
We will need to review the complete plantroom layout next week, at present the fan and stack position clash with a drainage gully and from the drawing there seems little/no space to set the ductwork. Also concerned there will be a narrow angle of wind brace support for the stack this close to the edge of the building
If we can reverse the complete scrubber system 180 including boiler position we will have more tolerance for the fan stack to exit straight out, more fexabily on the tank side ductwork and the support framework/bracing will be easier to install.
I need more clarity on the support framework you require for the Stack . Unable to open the Cad to check sizes can you add the info below to the PDF before I engage Vale for design.
Diameter between frame support, height of stack ,flange size if any required ,apertures ,fixing points ,height off roof to support frame, height of wind brace fixing points.
Regards
Dale
From: Neil Vaughan <N.Vaughan@sfeuk.com>
Sent: 14 May 2020 10:29
To: Vic Delveir <v.delveir@sfeuk.com>; Yearsley, Dale <Dale.Yearsley@ge.com>; Terry Dalvair <t.dalvair@sfeuk.com>
Cc: Grose, Jamie (GE Aviation) <Jamie.Grose@ge.com>; Watt, John (GE Aviation) <john.watt@ge.com>; John, Mark (GE Aviation) <mark.john1@ge.com>
Subject: EXT: RE: Plantroom works, scrubber and boiler install
Dale,
Please see attached drawing, which answers most your points as below,, other info will be confirmed during our visit next week.
Regards
Neil.
From: Vic Delveir <v.delveir@sfeuk.com>
Sent: 13 May 2020 11:28
To: Yearsley, Dale <Dale.Yearsley@ge.com>; Terry Dalvair <t.dalvair@sfeuk.com>
Cc: Grose, Jamie (GE Aviation) <Jamie.Grose@ge.com>; Watt, John (GE Aviation) <john.watt@ge.com>; John, Mark (GE Aviation) <mark.john1@ge.com>; Neil Vaughan <N.Vaughan@sfeuk.com>
Subject: RE: Plantroom works, scrubber and boiler install
Dear Dale
Thanks for the call this morning, we can clarify the points below for you, I will have a review with Neil and Terry and come back to you this afternoon.
We are planning to attend site next week Wednesday, I have sent you a list of attendees on an earlier email.
Regards
Vic Delveir
Business Development Director
Surface Finishing Engineering Ltd
Unit 16 Webner Industrial Estate
Ettingshall Road
Wolverhampton
WV2 2LD
Tel: 01902 409186
Mob: 07908 377786
ü Consider your responsibility to the environment - think before you print!
Disclaimer
---------------------------------------------------------------------------
This email (which includes any attached files) is confidential
and may also be legally privileged. It is intended solely for the use of the
individual to whom it is addressed. Any views or opinions presented
are solely those of the author and do not necessarily represent those
of Surface Finishing Engineering Ltd.
From: Yearsley, Dale <Dale.Yearsley@ge.com>
Sent: Wednesday, 13 May, 2020 10:36 AM
To: Vic Delveir <v.delveir@sfeuk.com>; Terry Dalvair <t.dalvair@sfeuk.com>
Cc: Grose, Jamie (GE Aviation) <Jamie.Grose@ge.com>; Watt, John (GE Aviation) <john.watt@ge.com>; John, Mark (GE Aviation) <mark.john1@ge.com>
Subject: Plantroom works, scrubber and boiler install
Hi Vic
Ref our earlier telecom ,
· Can you provide side elevation drawing of scrubber unit ref height measurements
· Can you provide side elevation drawing of scrubber and fan ductwork routeing
· Can you confirm filled weight of scrubber -14 or 19tons
· Can you confirm power /water/drainage requirements for new scrubber
· Can you confirm if existing Wanson boiler plant will restrict build access for the new scrubber [Require new boiler running prior to removal of existing]
· New wanson boiler equipment to linked via temporary pipework to existing system to allow removal of existing plant
· Can the new wanson boiler control panel be relocated to opposite wall shown on drawing [Access to new plantroom required at panel position]
· Can you confirm ductwork spec [PVC, POLYPROP ,STAINLESS, GALV]?
Items to review at meeting
· 2m ductwork routeing off Fan [at present clashes with roof drainage system]
· Position of existing water break tank
· Loading Access to plantroom
Let me know names and dates to book in for next weeks visit
Regards
Dale
Croesawn ohebu yn Gymraeg a fydd gohebu yn y Gymraeg ddim yn arwain at oedi. Rhowch wybod inni beth yw'ch dewis iaith e.e. Cymraeg neu'n ddwyieithog
Mae'r neges ar gyfer y person / pobl enwedig yn unig. Gall gynnwys gwybodaeth bersonol, sensitif neu gyfrinachol. Os nad chi yw'r person a enwyd (neu os nad oes gyda chi’r awdurdod i'w derbyn ar ran y person a enwyd) chewch chi ddim ei chopïo neu’i defnyddio, neu'i datgelu i berson arall. Os ydych chi wedi derbyn y neges ar gam, rhowch wybod i'r sawl sy wedi anfon y neges ar unwaith. Mae'n bosibl y bydd holl negeseuon yn cael eu cofnodi a/neu fonitro unol â’r ddeddfwriaeth berthnasol. I ddarllen yr ymwadiad llawn, ewch i http://www.rctcbc.gov.uk/ymwadiad
We welcome correspondence in Welsh and corresponding with us in Welsh will not lead to a delay. Let us know your language choice if Welsh or bilingual
This transmission is intended for the named addressee(s) only and may contain personal, sensitive or confidential material and should be handled accordingly. Unless you are the named addressee (or authorised to receive it for the addressee) you may not copy or use it, or disclose it to anyone else. If you have received this transmission in error please notify the sender immediately. All traffic may be subject to recording and/or monitoring in accordance with relevant legislation For the full disclaimer please access http://www.rctcbc.gov.uk/disclaimer
Croesawn ohebu yn Gymraeg a fydd gohebu yn y Gymraeg ddim yn arwain at oedi. Rhowch wybod inni beth yw'ch dewis iaith e.e. Cymraeg neu'n ddwyieithog
Mae'r neges ar gyfer y person / pobl enwedig yn unig. Gall gynnwys gwybodaeth bersonol, sensitif neu gyfrinachol. Os nad chi yw'r person a enwyd (neu os nad oes gyda chi’r awdurdod i'w derbyn ar ran y person a enwyd) chewch chi ddim ei chopïo neu’i defnyddio, neu'i datgelu i berson arall. Os ydych chi wedi derbyn y neges ar gam, rhowch wybod i'r sawl sy wedi anfon y neges ar unwaith. Mae'n bosibl y bydd holl negeseuon yn cael eu cofnodi a/neu fonitro unol â’r ddeddfwriaeth berthnasol. I ddarllen yr ymwadiad llawn, ewch i http://www.rctcbc.gov.uk/ymwadiad
We welcome correspondence in Welsh and corresponding with us in Welsh will not lead to a delay. Let us know your language choice if Welsh or bilingual
This transmission is intended for the named addressee(s) only and may contain personal, sensitive or confidential material and should be handled accordingly. Unless you are the named addressee (or authorised to receive it for the addressee) you may not copy or use it, or disclose it to anyone else. If you have received this transmission in error please notify the sender immediately. All traffic may be subject to recording and/or monitoring in accordance with relevant legislation For the full disclaimer please access http://www.rctcbc.gov.uk/disclaimer
Croesawn ohebu yn Gymraeg a fydd gohebu yn y Gymraeg ddim yn arwain at oedi. Rhowch wybod inni beth yw'ch dewis iaith e.e. Cymraeg neu'n ddwyieithog
Mae'r neges ar gyfer y person / pobl enwedig yn unig. Gall gynnwys gwybodaeth bersonol, sensitif neu gyfrinachol. Os nad chi yw'r person a enwyd (neu os nad oes gyda chi’r awdurdod i'w derbyn ar ran y person a enwyd) chewch chi ddim ei chopïo neu’i defnyddio, neu'i datgelu i berson arall. Os ydych chi wedi derbyn y neges ar gam, rhowch wybod i'r sawl sy wedi anfon y neges ar unwaith. Mae'n bosibl y bydd holl negeseuon yn cael eu cofnodi a/neu fonitro unol â’r ddeddfwriaeth berthnasol. I ddarllen yr ymwadiad llawn, ewch i http://www.rctcbc.gov.uk/ymwadiad
We welcome correspondence in Welsh and corresponding with us in Welsh will not lead to a delay. Let us know your language choice if Welsh or bilingual
This transmission is intended for the named addressee(s) only and may contain personal, sensitive or confidential material and should be handled accordingly. Unless you are the named addressee (or authorised to receive it for the addressee) you may not copy or use it, or disclose it to anyone else. If you have received this transmission in error please notify the sender immediately. All traffic may be subject to recording and/or monitoring in accordance with relevant legislation For the full disclaimer please access http://www.rctcbc.gov.uk/disclaimer
Croesawn ohebu yn Gymraeg a fydd gohebu yn y Gymraeg ddim yn arwain at oedi. Rhowch wybod inni beth yw'ch dewis iaith e.e. Cymraeg neu'n ddwyieithog
Mae'r neges ar gyfer y person / pobl enwedig yn unig. Gall gynnwys gwybodaeth bersonol, sensitif neu gyfrinachol. Os nad chi yw'r person a enwyd (neu os nad oes gyda chi’r awdurdod i'w derbyn ar ran y person a enwyd) chewch chi ddim ei chopïo neu’i defnyddio, neu'i datgelu i berson arall. Os ydych chi wedi derbyn y neges ar gam, rhowch wybod i'r sawl sy wedi anfon y neges ar unwaith. Mae'n bosibl y bydd holl negeseuon yn cael eu cofnodi a/neu fonitro unol â’r ddeddfwriaeth berthnasol. I ddarllen yr ymwadiad llawn, ewch i http://www.rctcbc.gov.uk/ymwadiad
We welcome correspondence in Welsh and corresponding with us in Welsh will not lead to a delay. Let us know your language choice if Welsh or bilingual
This transmission is intended for the named addressee(s) only and may contain personal, sensitive or confidential material and should be handled accordingly. Unless you are the named addressee (or authorised to receive it for the addressee) you may not copy or use it, or disclose it to anyone else. If you have received this transmission in error please notify the sender immediately. All traffic may be subject to recording and/or monitoring in accordance with relevant legislation For the full disclaimer please access http://www.rctcbc.gov.uk/disclaimer
